Built April 2025, running current versions of all software! This is a budget build with some parts used (see parts rundown below). On the most demanding vpinworkshop tables, cpu is never above 65-70%, GPU never out of the 60-70s typically. Every table runs stutter free, and never drops from 59-60FPS. I had to disable about 5 or 6 of my 270+ tables, compared to the typical new builds i sell, some 10.7 tables just dont get along with the RTX 2080 like they do the 4060 in my standard new build. NEW Raidmax ATX case with 4 led fans (not motherboard controlled) also not shown, but has full tempered glass side panel. Windows 11 Pro, fully licensed and activated. USED Intel I7-9700 8 CORE. NEW Thermaltake CPU Air Cooler. NEW16GB TeamGroup DDR4 RAM. USED ASRock Z370 gaming Motherboard. USED RTX 2080 Video CARD. NEW 500GB Teamgroup M. NEW Power Supply is a Thermaltake 600w. Please note, you must provide your own screens, this is ONLY the computer tower. This runs a a 4k 60hz playfield, and 2 additional screens, super smooth. This build is designed specifically for this setup, which you MUST have. 4k play field running 60hz. A 1080p backglass monitor. A 16:9 ratio 3rd screen for FULL DMD at 1366×768 (these 3 resolutions work perfect with a ATG 4K). NO USB MONITORS, must run though video card. Your screens need to remember the power state, so when you kill power, and apply power, they auto come on again (all pc monitors do this, but some TV’s cant, and require a remote to power on each time). Screens must up and running before windows boots, or your screens re-arrange each time, and you have to re-configure. (these 3 resolutions work perfect with a ATG 4K). Plug in 3 monitors, launch the PinUP app and go! Its as close to plug and play as you can go, screens like to rearrange sometimes when changing monitor brands, i’ll walk you through the initial config, I provide good instructions and after sales support! Ive built 30 plus pincabs, and probably 100 Pin PCs. Ive been working in IT for 20+ years. I want to sell this to someone that’s putting together a virtual pinball cabinet and needs a capable computer for a good deal, and wants to skip 100s of hours of downloads, config and recording all those preview videos. Please be familiar with the programs that run all this, and have some decent computer skills, its not hard, but you need to know your way around windows. I have over a dozen customers use this with ATGAMES 4K Cabinets, this worked perfectly! They Had to do some some screen arranging, and video settings upfront, then up in going, typically under 20 minutes to get it sorted. For ATG4k, The buttons will use “XPADDER” from what ive been told, Wagners Tech Talk covers everything Atgames4k related, so i highly recommend his youtube channel! Currently running the LATEST tables as of March 2025, running the latest baller installer, with VPX 10.7, beta7, latest 10.8, with the latest pinmame, and b2s 2.1. Im very much on QUALITY over quantity, It has 270+ tables, the latest best looking stuff made for 10.7 and 10.8, if a colored rom is available, that table will have that! Dozens use Pinup Packs as well. Colored rom support works on vni, pac, and the crz/serum, and new serum V2 format. Several star wars, several batman, several star trek, XMEN, Avengers, ACDC, Metallica, Aerosmith, anything popular in the last 30 years! Its running most of the new “pinup required” type tables in VPX, like Harry Potter Goblet of Fire, Masters of the Universe, Iron Maiden, Guardians of the Galaxy, Batman 66, Darkest Dungeon, Spooky Wednesday, John Wick, and CyberRace. All VPX and FP tables have had preview videos recorded for playfield, and backglass. If there was a FULLDMD frame available, that game has that DMD video recorded as well. This took a LOT of time getting about 700 videos recorded for pinup popper. Most playfield videos were took in 1080 format, from my previous build, but a lot have been re-recorded in 4k, you can do that with just a few clicks as well! Future pinball runs 10+ tables, the current’good’ tables that FP has. (the latest batch of the PinEvent tables). Software is in’default’ locations, so its where it should be expected. IF you connect 3 screens, in the same order, and same resolutions as my setup, all 3 screens should be oriented correctly, and it work as soon as you plug it up. (this NEVER is the case with ATG4k, but its not bad getting it setup right). You need to be decent at using computers, installing games and software, basic use and understanding, this is 7 or 8 programs all working together the best they can, and you will have to make adjustments, troubleshoot, and so on, over time, as needed. NOTE: If you screens get out of order, i will provide printed out tips, and try to help you the most i can, txt/call you, and there’s LOTS of information on the forums and youtube for getting that squared away. The biggest part of this hobby is playing with everything and learning how it works. I recommend you make a full copy of the SSD drive, so you have a rock solid working image, before you make any changes, this will save your life when you do updates and upgrades later on, and it goes sideways. I INCLUDE a backup drive, set aside already, so you have that if you ever need it.
