Virtual Pinball Machine Computer 1080P VPX PC READY TO GO 16GB i5 GTX 1660Ti
Marked down to move, this will be my last build on this platform, get this one CHEAP! The PC in the photo is the unit you will receive! This is my 1080p build, if you want a NEW or Budget 4K setup, i have those listed as well, check my other listings. Ive owned/built over 40 virtual cabinets/setups in the past, Ive been working in IT for 20+ years. This build is designed specifically for this setup, which you MUST have. A 16:9 ratio 3rd screen for FULL DMD at 1366×768 (a 1920×1080 3rd screen will typically accept 1366×768 as well). NO USB MONITORS, must run though video card. No “skinny” style 4:1 ratio dmd’s, must be fullscreen style. Your screens need to remember the power state, so when you kill power, and apply power, they auto come on again (all pc monitors do this, but some TV’s cant, and require a remote to power on each time). Screens must up and running before windows boots, or your screens re-arrange each time, and you have to re-configure. If you are wanting 1 screen 2 screen, or slim dmd setup, that’s WAY different, and i don’t mess with that type of setup. These work well with ATGAMES HD 1080p setups, but you NEED to have the 16:9 3rd screen upgrade, otherwise you will have to edit every table and change a lot of files to fit the slim screen. (This will get you up and running 3 screens from a keyboard, but you will need to use Xpadder i believe for the OTG function, and your own audio solution, please check out wagners tech talk for ATGAMES technical help, and how to use a PC with your ATG cabinet). My 4k build i sell here works great with a atgames 4K table too! I want to sell this to someone that’s putting together a virtual pinball cabinet and needs a capable computer for a good deal, and wants to skip 100s of hours of downloads, and recording preview videos. NOTE: I will not sell just a “loaded drive” to anyone, please do not ask, and I highly suggest you contribute to the forums/groups/sites out there, keep the hobby alive, donate/contribute to the table authors whenever you can, they spend insane amounts of time creating these tables that we love to play. Dell optiplex case/MB with i5 3.3ghz quad core. NEW Teamgroup 16GB RAM. NEW TeamGroup Vulcan 480GB 2.5 SSD Hard Drive. NEW Thermaltake 500w PSU. MSI GeForce 1660TI 6GB Dual Fan Video Card. NEW Cmos battery replaced. Windows 10 PRO (licensed), with windows updates disabled, and everything that doesn’t need to be there, removed or turned off. Currently running the LATEST tables as of April 2025, running the latest baller installer, with VPX 10.7, 10.8beta5, beta7, 10.8RC1, RC3, RC4, with the latest pinmame 3.6, b2s 2.1, and dmdext 2.3.0 (supports new serumV2 color dmds). Im very much on QUALITY over quantity, yeah there’s people running 800+ tables, but there not that many actually GOOD tables, a lot of tables out there are fan made, 1st time tables and they don’t have good graphics, or game play, and its not worth adding. It has 270+ tables, no old VP9 tables, just the latest best looking stuff made for 10.7 and 10.8, if a colored rom is available, that table will have that! Dozens have had the Pinup Pack treatment as well. Colored rom support works on vni, and the crz/serum/serumV2 format. Currently, PAC is not working, due to differences between the authors of the software. With previous versions, I had all 3 formats, but right not pac format is not working. Several star wars, several batman, several star trek, XMEN, Avengers, ACDC, Metallica, Aerosmith, including the 3 screen capable deadpool, Guardians of the Galaxy, Batman 66, and Iron Maiden, SpongeBob SquarePants, all the GREAT tables of the 90s. The entire build was done during April 2025. Every table runs pretty much stutter free, and never drops from 59-60FPS, at 60FPS, the CPU load never goes above 60% and the video card never goes above 60%. (you get the occasional frame drop when a big multiball event happens for the first time on a table, but not again after the first time it happens, and its was VERY few tables). It has pinup popper, multiple VPX exes, DMDext, and vpinSPA for that “1” G. All VPX tables have had preview videos recorded for playfield, and backglass. If there was a FULLDMD frame available, that game has that DMD video recorded as well. This took a LOT of time getting about 600 videos recorded for pinup popper. Future pinball runs 11 tables, the current’good’ tables that FP has. The dell is cabinet install friendly! Cut the front panel power switch off, and wire it to a pushbutton on your cabinet, for power on/off, or set the bios to auto power on when it sees AC power, you can shut it down straight from Pinup Popper. IF you connect 3 screens, in the same order, and same resolutions as my setup, all 3 screens should be oriented correctly, and it work as soon as you plug it up. HOWEVER, if you use different hookups, different resolutions, it may re organize the screens, and you will have to play with Windows screen settings, and adjust the screens in each VPX executable. I include good documentation! I ran the baller installer to get all my initial setup done, then positioned the DMD’s in the right location on the FULLDMD screen. Software is in’default’ locations, so its where it should be expected. You need to be decent at using computers, installing games and software, basic use and understanding, this is 7 or 8 programs all working together the best they can, and you will have to make adjustments, troubleshoot, and so on, as needed down the road. This is NOT just plug in and it works 100%, its 99% going to be if you connect the screens correctly and the PC detects right off the bat! NOTE: If you screens get out of order, i provide printed out tips, and try to help you the most i can, there’s LOTS of information on the forums and youtube for getting that squared away. The biggest part of this hobby is playing with everything and learning how it works. I recommend you make a full copy of the SSD drive, prior to even powering it up, so you have the rock solid working image, before you make any changes, this will save your life when you do updates and upgrades later on, and it goes sideways. Its running most of the new “pinup required” type tables in VPX, like Harry Potter Goblet of Fire, Masters of the Universe, Iron Maiden, Guardians of the Galaxy, Batman 66, etc. Latest Adds are Darkest Dungeon, Spooky Wednesday, John Wick, and CyberRace. I also sell plunger kits that work with KL25z and Cleveland Software Boards, if you want a combo deal, just ask (will be setup to work with the plunger, right out of the box).
