Running on original hardware and original crt monitor. It’s shown in pics but not noticeable unless your looking for it. All in all a great piece to have and play.
This sale is for a pinball cabinet and various electronics and programming that turn your Full Sized 7th 8th Gen or 9th Gen 10.2inch screened iPad into a virtual pinball table. I believe it will also work with the 10.5inch iPad Pro but not yet tested. Instead of swiping the screen you get the real feel of real buttons and a sprung plunger that you can pull to fire the ball -and it looks cool for your mandesk when not in use. The iPad creates the working playfield. The’Top Screen’ (where it says’Play Pinball Here’) is just artwork stuck on. I have designed and built a table that works in conjunction with’Pinball Arcade’,’Stern Pinball Arcade”Pinball Arcade Plus’ and’Pinball Pro – Timeshock’ These are all iPad pinball games. In total there are over 30 pinball tables that are supported by my housing/electronics. It does not work with Zen or other games. I don’t include the game and I’m not in any way associated with these software companies. Note it won’t work with any other pinball game that I’m aware of. Personally I think they have some great tables with great physics. Although there are other ipad virtual pinball games, my table will only work with these due to the circuitry. There is a small CPU in the housing, and a lightning connector that connects to the buttons and your (already owned_ iPad 8th Gen or 9th Gen 10.2 with lightning), so that once you slot your ipad in, the flippers are now controlled by the buttons. The Plunger works too. Its a’digital plunger’ rather than’analogue’ plunger. The more time you pull the plunger back the more it pulls back the plunger in the games. I try to show this in the video below, where you can see that if I only pull the plunger back for a fraction of a second it only pulls the plunger back a tiny bit in the game. When I pull it back for a long time it pulls the plunger in the game all the way back. There is also a’nudge’ feature, so if you tilt the pinball table or knock it too hard while playing, it will’nudge’ the table on pinball tables that support that feature (which is most of them) too much nudge and you will’tilt’ the machine so watch out. Finally it also has a small vibration motor that activates when you press either of the side buttons to give some nice feedback. Simply load up Pinball Arcade or one of the other supported games, slide your 8th/9th gen 10.2inch iPad in and away you go. If you want to see it in action take a look my updated youtube video that shows how you put the ipad in, how it all works and how the plunger and tilt work. Choose whether you want the version with or without artwork. Half the fun is finding and creating nice artwork for YOUR pinball table. You can print on glossy vinyl adhesive paper and stick on. I use 3m doublesided tape for great adhesion. If you are interested in other artwork please contact me. The back screen is 7inchx5inch which is standard photo paper sized so you can easily print your own photo and stick at the back if you prefer a different design. The table arrives disassembled, but there are only 5 pieces that need pushing together then connect the flipper buttons – 5 min job with instructions provided. Let me know if you have questions, but basically. The iPad is NOT included – you need to supply your own. The software is also NOT included – you will need to download the games. You will get the housing and fully functioning electronics, buttons and tilt switch – just need to spend 5 mins to assemble. Its a lot of fun! (see my other listing for a smaller iPad mini version). This item is in the category “Video Games & Consoles\Coin-Operated Gaming\Pinball Machines”. The seller is “pickintastic” and is located in this country: GB. This item can be shipped worldwide.
Up for sale is one of the all time Pinball Machine Classics: The Addams Family. It’s been in our family for years, but it’s time for a new home. As far as its condition, you can see from the pictures that is has normal wear. A few of the corners on the top of the machine show the most wear, but overall, it’s in very good condition. Functionality wise, it works great. A few light bulbs need to be replaced, but otherwise, all the parts work as they’re supposed to. All flippers work great. The hand works fine. All the ramps, bumpers and shoots work as intended. When it finds its new home, it just needs to be plugged in and its in great, playable condition. Just finished testing it again today before posting this for sale. Take a look at all the pics and message with any questions. The new owner of this classic won’t be disappointed. Pinball machine is located in central Illinois, roughly 2-3 hours from Chicago, St. (5) All photos are of the actual item for sale – no stock photos. The item “Addams Family Pinball Machine Full Sized Arcade Game Classic Works great! L@@K” is in sale since Wednesday, July 25, 2018. This item is in the category “Collectibles\Arcade, Jukeboxes & Pinball\Pinball\Machines”. The seller is “bwmuhich” and is located in Mahomet, Illinois. This item can’t be shipped, the buyer must pick up the item.
